Tungsten price session · 28 October 2026
Tungsten prices on 28 October 2026
USD figures converted at USD/CNY 6.6664, Frankfurter (ECB reference rates), rate of 2026-10-28.
China Tungsten Online's daily assessment for 28 October 2026: wolframite concentrate was assessed at CNY 320,000-340,000 per standard tonne; APT at CNY 500,000-520,000 per tonne; tungsten powder at CNY 760-800 per kg; tungsten carbide powder at CNY 720-760 per kg; ferrotungsten FeW70 around CNY 510,000 per tonne. Against the prior session that is down 1.0%.
| Material | Spot consensus | Range across sources | Sources | Δ vs prior session |
|---|---|---|---|---|
| Wolframite concentrate 65% WO3 | 5,077 CNY/mtu USD 762 ≈ CNY 330,002/t at 65% WO3 | 4,923 – 5,231 spread 6.1% | 1 | ▼ 0.0% d/d |
| Ammonium paratungstate (APT) 88.5% WO3 | 510,000 CNY/t USD 76,503 | 500,000 – 520,000 spread 3.9% | 1 | ▼ 0.5% d/d |
| Tungsten powder 99.9% | 780 CNY/kg USD 117 | 760 – 800 spread 5.1% | 1 | ▲ 1.3% d/d |
| Tungsten carbide powder medium | 740 CNY/kg USD 111 | 720 – 760 spread 5.4% | 1 | flat |
| Ferrotungsten FeW70 | 510,000 CNY/t USD 76,503 | 510,000 – 510,000 spread 0.0% | 1 | flat |
What this material goes into
Carbide powder and APT are inputs, not end products. If you are pricing a part rather than tracking the market, these are the shapes we make from the grades above.
- Tungsten carbide rods — ground and unground rod for drills, end mills and reamers
- Carbide insert blanks — blanks for indexable inserts, in the grades carbide powder above feeds into
- Tungsten carbide dies — drawing, heading and stamping dies for wire and fasteners
- Carbide nozzles — wear-resistant nozzles for abrasive and high-pressure service
- Mining tool tips — buttons and tips for rock drilling in high-cobalt grades
- Carbide strips — strips and plates for press tooling and wear plates
Sources behind these numbers
Only the numeric assessments are taken from each source; the wording is ours. Every figure can be checked against the dated source below.
- China Tungsten Online — spot, as of 2026-10-28 · source
Buying carbide parts against these prices?
We produce tungsten carbide wear parts, cutting tool blanks and precision components from YG6, YG8, YK06 and YA20 grades. Tell us the part and the annual tonnage and we will quote against current powder cost.
Follow the tungsten price benchmark
Daily Chinese market prices plus the latest European APT reference — pick the channel that suits you.